LDAP

Authentication via Existing Identity Management Systems

Chef Automate can integrate with existing LDAP services to authenticate users in Chef Automate, and thus use their existing group memberships to determine their Chef Automate permissions.

Chef Automate supports using both local users and externally managed users from an external identity provider (IdP). Both one LDAP service (or MSAD for simplified configuration of Active Directory setups) and one SAML IdP can be used. You do not need to configure an external IdP if you simply want to create users and teams local to Chef Automate. See the Users documentation for additional information.

Chef Automate uses Dex to support LDAP integrations. To configure authentication for your Chef Automate installation, create a TOML file that contains the partial LDAP configuration. Then run chef-automate config patch </path/to/your-file.toml> to deploy your change.

Warning

You may only integrate one IdP using SAML and one IdP using LDAP at a time. Chef Automate does not support using two SAML IdPs or two LDAP services simultaneously.

Switching between a Microsoft AD configuration and generic LDAP configuration will not affect your policies, as they are both LDAP configurations. However, switching between either of those configurations and a SAML configuration will require you to adjust the IAM policy membership.

Note

Local, MSAD, and LDAP users will have their Chef Automate sessions refreshed while their Chef Automate browser window remains open or until they sign out directly.

Supported Identity Management Systems

Azure Active Directory
Microsoft Active Directory (MSAD)

Overview

This is documentation for configuring Chef Automate’s Lightweight Directory Application Protocol (LDAP) and Microsoft Active Directory (MSAD) integrations. LDAP is an established and open standard protocol for interacting with directory servers. A directory server stores information–in this case information for authenticating and authorizing users–in a tree of entries. (It is not a relational database.)

Microsoft Active Directory

Microsoft Active Directory (MSAD) is a type of directory server that supports LDAP. Chef Automate comes with a default LDAP configuration for MSAD. The Chef Automate default MSAD configuration is a minimal configuration for standard MSAD systems, which you can extend by overriding default values and using additional configuration options. Chef Automate’s default configuration for Microsoft AD is specific to LDAP. To configure Microsoft AD using SAML, see the SAML documentation.

Changing Chef Automate Configuration

If you need to change your configured external identity provider settings, replace your existing configuration by following these steps:

Run chef-automate config show config.toml.
Edit config.toml to replace the dex.sys.connectors section with the configuration values for your new identity provider.
Run chef-automate config set config.toml to set your updated configuration.

Minimal MSAD Configuration

base_user_search_dn

“your base user search DN”

base_group_search_dn

“your base group search DN”

bind_dn

“your bind_dn”

bind_password

“your bind_password”

bind_password may also be passed via the AUTOMATE_SECRET_MSAD_PASSWORD environment variable when running chef-automate commands.

ca_contents

Your certificate authority (CA) certificate contents. You can provide multiple PEM-encoded CA certs. Optional.

# Example ca_contents setting:
ca_contents = """-----BEGIN CERTIFICATE-----
MIICsDCCAhmgAwIBAgIJAJxMopMJbhPkMA0GCSqGSIb
...
X0uRzUPlpTtd5tYFs43nKqxJT6s=
-----END CERTIFICATE-----"""

host

The domain name of your directory server, for example "ldap.corp.com". Default port: 636. Override the port by appending it to the host setting, "ldap.corp.com:10636"

Minimal MSAD config.toml

[dex.v1.sys.connectors.msad_ldap]
host = "<your host>"
bind_dn = "<your bind_dn>"
bind_password = "<your bind_password>"
base_user_search_dn = "<your base user search DN>"
base_group_search_dn = "<your base group search DN>"
ca_contents = "<your ca contents>" # optional, but recommended

Full MSAD Configuration

The MSAD configuration is an LDAP configuration with more provided default values that are commonly a good fit for Active Directory. Override any single default value by uncommenting it in the configuration and setting its value:

email_attr: “mail”
filter_groups_by_user_attr: “member”
filter_groups_by_user_value: “DN”
group_query_filter: “(objectClass=group)”
group_display_name_attr: “displayName”
insecure_no_ssl: false

Warning

Connecting to an LDAP service without TLS is not recommended.

user_display_name_attr: “displayName”
user_id_attr: “sAMAccountName”
user_query_filter: “(objectClass=person)”
username_attr: “sAMAccountName”

Example Full MSAD config.toml

[dex.v1.sys.connectors.msad_ldap]
host = "<your host>"
bind_dn = "<your bind_dn>"
bind_password = "<your bind_password>"
base_user_search_dn = "<your base user search DN>"
base_group_search_dn = "<your base group search DN>"
ca_contents = "<your ca contents>" # optional

# MSAD default values (uncomment to override a specific one)
# insecure_no_ssl = false
# user_query_filter = "(objectClass=person)"
# user_id_attr = "sAMAccountName"
# username_attr = "sAMAccountName"
# email_attr = "mail"
# user_display_name_attr = "displayName"
# group_query_filter = "(objectClass=group)"
# filter_groups_by_user_value = "DN"
# filter_groups_by_user_attr = "member"
# group_display_name_attr = "displayName"

Extended LDAP Settings

For those who do not use Microsoft AD or require greater control over their configuration, Chef Automate has the following customizable LDAP configuration settings:

base_group_search_dn: “your base group search DN”
base_user_search_dn: “your base user search DN”
bind_dn: “your bind_dn”
bind_password: “your bind_password”
ca_contents: “your ca contents”
email_attr: “your email attribute”
filter_groups_by_user_attr: “groups to filter by user attribute”
filter_groups_by_user_value: “groups to filter by user value”
group_display_name_attr: “group display name attribute”
group_query_filter: “your group query filter”
host: “your host”

insecure_no_ssl :true or false

user_query_filter: “your user query filter”
username_attr: “your username attribute”
user_id_attr: “your userid attribute”
user_display_name_attr: “your user display name attribute”

Example Extended LDAP config.toml

[dex.v1.sys.connectors.ldap]
# authentication options
ca_contents = "<your ca contents>"
host = "<your host>"
bind_dn = "<your bind_dn>"
bind_password = "<your bind_password>"
insecure_no_ssl = true or false

# ldapsearch options
base_user_search_dn = "<your base user search DN>"
user_query_filter = "<your user query filter>"
username_attr = "<your username attribute>"
user_id_attr = "<your userid attribute>"
email_attr = "<your email attribute>"
user_display_name_attr = "<your user display name attribute>"
base_group_search_dn = "<your base group search DN>"
group_query_filter = "<your group query filter>"
filter_groups_by_user_attr = "<groups to filter by user attribute>"
filter_groups_by_user_value = "<groups to filter by user value>"
group_display_name_attr = "<group display name attribute>"

See the LDAP for more information on configuration fields. You have the full extent of TOML is at your disposal for declaring configuration fields.

Warning

Connecting to an LDAP service without TLS is not recommended.

However, if you wish to integrate with an LDAP server with TLS disabled:

insecure_no_ssl = true

Once the user has provided a username and password at the sign in screen, Chef Automate goes through a sequence of operations to complete the sign in:

Connect
Bind
User Search
Sign in Bind
Group Search

Authorization with LDAP

Chef Automate supports defining permissions for LDAP users and their groups. See IAM members and policies.

Connect

Chef Automate first needs to establish a TCP connection to your LDAP service, secured by TLS. It will connect to the host configured in your TOML configuration, for example:

host = "ldap.corp.com"

Automate uses port 636 by default. To override the port, append it to the host setting, e.g.

host = "ldap.corp.com:10636"

Whether the validity of the server’s TLS certificate will be enforced depends on the TLS setup: if you provide a certificate authority’s (CA) certificate(s), Chef Automate will only communicate with the LDAP service if the certificate provided by the host can be validated using the CA certificate(s).

Warning

Connecting to an LDAP service without TLS is not recommended.

However, if you wish to integrate with an LDAP server with TLS disabled:

insecure_no_ssl = true

See Troubleshoot your Connection for common issues related to Connect.

Bind

Chef Automate then authenticates with (or “binds to”) the LDAP service using bind credentials. In your configuration TOML file, these would be (for example):

bind_dn = "cn=service_account,dc=corp,dc=com"
bind_password = "i<3ldap"

If your LDAP server supports anonymous bind, and you want to use that, unset both bind DN and password:

bind_dn = ""
bind_password = ""

Wrap special characters in a bind_password in triple single quotes.

bind_password = '''$p3c"i'@l ! %#'''

See Troubleshoot Bind for common issues related to Bind.

User Search

After binding successfully, Chef Automate will try to obtain the directory name of the user that is trying to sign in.

To do so, it will search, using the configured base base_user_search_dn, for an entry such that username_attr equals the username that attempted to sign in.

If configured, it will retrieve additional attributes, using the configured names (user_id_attr, email_attr, and user_display_name_attr). See Configuration: LDAP for an overview.

Note

The ldapsearch command line corresponding to User Search is

ldapsearch -h $host -D $bind_dn -w $bind_password \
  -s sub \
  -b $base_user_search_dn \
  "($username_attr=$username)" \
  $user_id_attr $user_display_name_attr $email_attr

where username is what was typed into the username input box in the Sign in form.

Warning

If the LDAP search fails to retrieve the configured attributes, the sign in process will fail.

See Troubleshoot User Search for common issues related to User Search.

You can further restrict the user search by providing a valid LDAP filter to user_query_filter. For example,

user_query_filter = "(objectClass=person)"

which will be concatenated with the search filter constructed from the provided username in the sign in screen. The contents of user_query_filter gets expanded to (&<user_query_filter_value>) so you can pass in multiple filters.

For example, if you wanted to only allow people that were members of a specific Active Directory group to sign in to Chef Automate, you could define a user_query_filter with multiple filters like:

user_query_filter = "(objectClass=person)(memberof=CN=YourGroupToFilterOn,OU=Users,DC=YourDomain,DC=com)"

This filter says “only allow people who are members of YourGroupToFilterOn to sign in to Chef Automate”. When a user tries to sign in, they would only be authorized if they were found after the filter is applied:

(&(objectClass=person)(memberof=CN=YourGroupToFilterOn,OU=Users,DC=YourDomain,DC=com))

Note

The ldapsearch command line corresponding to User Search with restricted groups is

ldapsearch -h $host -D $bind_dn -w $bind_password \
  -s sub \
  -b $base_user_search_dn \
  "(&$user_query_filter($username_attr=$username))"

where username is what was typed into the username input box in the Sign in form.

See ldapsearch Example Queries for an example on using ldapsearch, and different directory layouts.

When the search for a user directory entry has succeeded, the LDAP connector will attempt to bind as the user entry, using the supplied password.

For example, if the sign in using jane:janespassword has resulted in a successful user search, returning cn=jane,ou=People,dc=corp,dc=com, the next step will be to bind again using that DN, and the password janespassword.

Note

The ldapsearch command line corresponding to User Search is

ldapsearch -h $host -D $user_dn -w $password

where user_dn is the DN of the user that was returned in User Search, and password is what was typed into the password input box in the Sign in form.

Note that result: 32 No such object is the successful response here, a failed sign in bind using ldapsearch returns:

ldap_bind: Invalid credentials (49)
        additional info: INVALID_CREDENTIALS: Bind failed: Cannot authenticate user uid=test2,ou=users,ou=system

See Troubleshoot Sign In Bind for common issues related to Sign_In_Bind.

Group Search

Finally, after the user has been authenticated, their internal record is enriched with LDAP-provided groups. This happens by executing another search using the same bind DN and password that was used for user search.

Similar to user search, a base DN has to be provided; and the result can be restricted by providing an additional filter:

base_group_search_dn = "ou=Groups,dc=corp,dc=com"
group_query_filter = "(objectClass=group)"

The correct configuration settings again depend on your directory server’s schema; see the example configs below.

Warning

The base_group_search_dn setting is optional. However, if it is not provided, users authenticating via LDAP (or MSAD) will not be members of any teams.

Note

The ldapsearch command line corresponding to Group Search is

ldapsearch -h $host -D $bind_dn -w $bind_password \
  -s sub \
  -b $base_group_search_dn \
  "($filter_groups_by_user_attr=$user_attr)" \
  $group_display_name_attr

where user_attr is the $filter_groups_by_user_value of the user that was returned in User Search.

See Troubleshoot Group Search for common issues related to Group Search.

Configuration Overview

See below for the full configuration and additional details about all LDAP configuration options.

[dex.v1.sys.connectors.ldap]
  ###
   # Configuration for querying your LDAP server
   ###
   ca_contents = "<your ca contents>"
   host = "<your host>"

   # The DN and password you wish to bind to your LDAP server to search for
   # users to authenticate for Chef Automate (and also to search for their group membership).
   # Example: "uid=seviceaccount,cn=users,dc=example,dc=com"
   bind_dn = "<your bind_dn>"

   # bind_password may also be passed via the AUTOMATE_SECRET_LDAP_PASSWORD environment
   # variable when running `chef-automate` commands.
   bind_password = "<your bind_password>"

   ###
   # User Query (search for LDAP users to authenticate for Chef Automate)
   ###
   # The base DN to start the user query.
   # Chef Automate will use this as the base DN on which to search for users to authenticate against your LDAP server.
   # Example: "cn=users,dc=example,dc=com"
   base_user_search_dn = "<your base user search DN>"

   # The LDAP field used to filter the query for users to authenticate for Chef Automate.
   # Example: Setting this to "uid" would result in a filter of "(uid=<username_for_user_trying_to_authenticate>)".
   username_attr = "<your username attribute>"

   # Optional: LDAP query filter to apply when searching for users to authenticate.
   # This will be combined with username_attr filter above.
   # Example: Setting this to "(objectClass=person)" will filter on human actors only.
   user_query_filter = "<your user query filter>"

   ###
   # Populating the Chef Automate User via LDAP
   ###
   # Determines which LDAP field populates the username in a user's Chef Automate session on successful authentication.
   user_id_attr = "<your userid attribute>"

   # Optional: determines which LDAP field populates the email in a user's Chef Automate session on successful authentication.
   # Defaults to "user_id_attr" if not specified.
   email_attr = "<your email attribute>"

   # Optional: determines which LDAP field populates the display name in a user's Chef Automate session on successful authentication.
   # Defaults to "name" if not specified.
   user_display_name_attr = "<your user display name attribute>"

   ###
   # Group Query (search for LDAP group membership for an authenticated user)
   ###
   # The base DN to start the group membership query.
   # Chef Automate will use this as the base DN on which to search for LDAP group membership for a specific LDAP user.
   # Example: "cn=groups,dc=freeipa,dc=example,dc=com"
   base_group_search_dn = "<your base group search DN>"

   # The following two fields are used to match a user to a group.
   # If the defaults are used, then you end up with a group membership
   # filter of "(&(objectClass=group)(member=<user's DN>))".
   # Optional: The LDAP field by which you wish to filter group membership.
   # Defaults to "member".
   filter_groups_by_user_attr = "<groups to filter by user attribute>"
   # Optional: The LDAP field from the authenticated user you wish to use as input to the above filter.
   # Defaults to "DN".
   filter_groups_by_user_value = "<groups to filter by user value>"

   # Optional: Additional LDAP filter you can define to further filter group membership results.
   group_query_filter = "<your group query filter>"

   # The LDAP field on the group you wish to use as the Chef Automate Team name for the group.
   # Defaults to "name".
   group_display_name_attr = "<group display name attribute>"

Example Configs

Depending on your directory’s schema, different Group Search settings are required:

If your directory looks like this

dn: dc=corp,dc=com
objectClass: dcObject
objectClass: organization
o: Example Company
dc: corp

dn: ou=People,dc=corp,dc=com
objectClass: organizationalUnit
ou: People

dn: cn=jane,ou=People,dc=corp,dc=com
objectClass: person
objectClass: inetOrgPerson
sn: doe
cn: jane

dn: cn=john,ou=People,dc=corp,dc=com
objectClass: person
objectClass: inetOrgPerson
sn: doe
cn: john

# Groups
dn: ou=Groups,dc=corp,dc=com
objectClass: organizationalUnit
ou: Groups

dn: cn=admins,ou=Groups,dc=corp,dc=com
objectClass: groupOfNames
cn: admins
member: cn=john,ou=People,dc=corp,dc=com
member: cn=jane,ou=People,dc=corp,dc=com

dn: cn=developers,ou=Groups,dc=corp,dc=com
objectClass: groupOfNames
cn: developers
member: cn=jane,ou=People,dc=corp,dc=com

then the following would be required:

base_user_search = "ou=People,dc=corp,dc=com"
username_attr = "cn"
user_id_attr = "cn"
user_display_name_attr = "cn"

base_group_search = "ou=Groups,dc=corp,dc=com"
filter_groups_by_user_value = "DN"
filter_groups_by_user_attr = "member" # default
group_display_name_attr = "cn"

However, if your schema looks like this – with no list of members in your group entries:

dn: dc=corp,dc=com
objectClass: dcObject
objectClass: organization
o: Example Company
dc: corp

dn: ou=People,dc=corp,dc=com
objectClass: organizationalUnit
ou: People

dn: cn=jane,ou=People,dc=corp,dc=com
objectClass: person
objectClass: inetOrgPerson
sn: doe
cn: jane
departmentNumber: 1000
departmentNumber: 1001

dn: cn=john,ou=People,dc=corp,dc=com
objectClass: person
objectClass: inetOrgPerson
sn: doe
cn: john
departmentNumber: 1000
departmentNumber: 1002

dn: ou=Groups,dc=corp,dc=com
objectClass: organizationalUnit
ou: Groups

dn: cn=admins,ou=Groups,dc=corp,dc=com
objectClass: posixGroup
cn: admins
gidNumber: 1000

dn: cn=developers,ou=Groups,dc=corp,dc=com
objectClass: posixGroup
cn: developers
gidNumber: 1001

dn: cn=designers,ou=Groups,dc=corp,dc=com
objectClass: posixGroup
cn: designers
gidNumber: 1002

You will need different settings to tie users and groups together:

base_user_search = "ou=People,dc=corp,dc=com"
username_attr = "cn"
user_id_attr = "cn"
user_display_name_attr = "cn"

base_group_search = "ou=Groups,dc=corp,dc=com"
filter_groups_by_user_value = "departmentNumber"
filter_groups_by_user_attr = "gidNumber"
group_display_name_attr = "cn"

Troubleshooting

The following section will lay down some indicators to determine which step of the sign in process has failed.

Troubleshoot your Connection

If the host or port was wrong, or Chef Automate was not able to reach the LDAP service, the sign in screen will display

Internal Server Error
Login error.

In the logs (journalctl -u chef-automate), you will find a line from automate-dex.default like this – note that for readability, the timestamp and service name has been removed from this example log):

level=error msg="Failed to login user: failed to connect: LDAP Result Code 200 \"\": dial tcp 192.168.33.223:10637: getsockopt: connection refused"

Note that the log contains the IP address even when the LDAP server was configured via hostname. Double-checking that can be helpful to exclude issues in domain-name resolution.

Issues in TLS verification manifest in the same way, but the log indicates that:

level=error msg="Failed to login user: failed to connect: LDAP Result Code 200 \"\": x509: certificate is valid for localhost, not dex-dev.test"

Troubleshoot Bind

Issues in bind manifest in the same way (“Internal Server Error”) as Connect issues. However, they differ in what gets logged:

level=error msg="Failed to login user: ldap: initial bind for user \"cn=service_account,dc=corp,dc=com\" failed: LDAP Result Code 49 \"Invalid Credentials\": "

Troubleshoot User Search

There’s two main ways the user search could fail, and they lead to different sign in failures: One is queries that cannot be executed at all, leading to

Internal Server Error
Login error.

in the browser and a line like

level=info msg="performing ldap search ou=Peoples,dc=example,dc=org sub (cn=jane)"
level=error msg="Failed to login user: ldap: search with filter \"(cn=jane)\" failed: LDAP Result Code 32 \"No Such Object\": "

in the logs.

One possible cause (whose logs you see here) is a misconfigured base_user_search_dn.

When the user search is executed successfully, but fails to return a useful user record, the browser will show the sign in prompt with an error banner saying

Username or password is incorrect.

In the logs, you will find more information. There is a line informing you about the actual search query,

level=info msg="performing ldap search ou=People,dc=corp,dc=com sub (cnn=jane)"

together with an entry saying that nothing was returned by the attempted query:

level=error msg="ldap: no results returned for filter: \"(cnn=jane)\""

In this example output, the username_attr was set to cnn (not cn).

Since there is no way for the LDAP integration to determine whether a configuration was wrong or the provided user does not exist, the sign in UI can only assume that the credentials were invalid.

Note that invalid entries for user_query_filter will lead to queries that return no entries, too. Setting

user_query_filter = "(objectClass=person)"

will lead to the following logs:

level=info msg="performing ldap search ou=People,dc=example,dc=org sub (&(objectClass=person(cn=jane))" connector=LDAP
level=error msg="ldap: no results returned for filter: \"(&(objectClass=person(cn=jane))\"" connector=LDAP

Warning

User search also fails if more than one user is returned.

Ensure that a search for username_attr with the given search base can only return one user. Something like this could happen (simplified for demonstration):

dn: cn=jane,ou=Denver,ou=People,dc=corp,dc=com
sn: doe
cn: jane
username: jdoe

dn: cn=john,ou=Boston,ou=People,dc=corp,dc=com
sn: doe
cn: john
username: jdoe

with

base_user_search_dn = "ou=People,dc=corp,dc=com"
username_attr = "username"

neither Jane Doe nor her brother could sign in to Chef Automate. There would be a log indicating that multiple users have been returned.

This situation would be averted by setting username_attr = "cn"; or by restricting base_user_search_dn, if you only want to allow people from one of either cities to use Chef Automate.

Warning

Attributes that have been configured, but are not found in the results, lead to user search failures, too. Note that this also affects default values.

Finally, a successful user search logs a line like the following:

level=info msg="username \"jane\" mapped to entry cn=jane,ou=People,dc=corp,dc=com"

Failures in sign in bind that are not caused by invalid credentials will lead to

Internal Server Error
Login error.

accompanied by a log line with more details, starting with Failed to sign in user.

Troubleshoot Group Search

Failures in retrieving a user’s groups will inhibit their sign in with

Internal Server Error
Login error.

and logs like

level=info msg="performing ldap search ou=Groups,dc=example,dc=org sub (member=cn=jane,ou=People,dc=example,dc=org)"
level=error msg="Failed to login user: ldap: failed to query groups: ldap: search failed: LDAP Result Code 32 \"No Such Object\": "

This, for example, is what you see when the base_group_search_dn does not exist ("ou=Groups,dc=...").

However, contrary to how User Search works, an empty result from Group Search will not inhibit sign in, it will merely not populate the user’s internal record with any groups.

A successful sign in causes log entries like the following:

level=info msg="performing ldap search ou=People,dc=corp,dc=com sub (cn=jane)"
level=info msg="username \"jane\" mapped to entry cn=jane,ou=People,dc=corp,dc=com"
level=info msg="performing ldap search ou=Groups,dc=corp,dc=com sub (member=cn=jane,ou=People,dc=corp,dc=com)"
level=info msg="login successful: connector \"ldap\", username=\"jane\", email=\"janedoe@example.com\", groups=[\"admins\" \"developers\"]"

and subsequent API authorization request logs containing the user’s subjects:

level=info msg="Authorization Query" action=search resource="compliance:profiles" result=true subject="[team:ldap:admins team:ldap:developers user:ldap:jane]"

`ldapsearch` Example Queries

For debugging purposes it can be useful to execute LDAP queries manually using the ldapsearch utility. On Ubuntu, it is provided via ldap-utils (i.e., sudo apt-get install ldap-utils). In what follows, we will outline an example directory layout, and the ldapsearch queries corresponding to the different phases.

The User Search query looks like this, with comments referencing the configurables for LDAP integration:

ldapsearch -H ldap://ldap-server:636/ \  # host
  -D cn=service_account,dc=corp,dc=com \ # bind_dn
  -w admin \                             # bind_password
  -b ou=People,dc=corp,dc=com \          # base_user_search_dn
  -s sub \
  '(cn=jane)'                            # (username_attr=what-was-provided-via-sign-in-form)

When using anonymous bind:

ldapsearch -H ldap://ldap-server:636/ \ # host
  -b ou=People,dc=corp,dc=com \         # base_user_search_dn
  -s sub \
  '(cn=jane)'                           # (username_attr=what-was-provided-via-sign-in-form)

If you have configured a user_query_filter, it is wrapped into the filter argument:

  '(&(objectClass=person)(cn=jane))'    # (&user_query_filter(username_attr=what-was-provided-via-sign-in-form))

Once a user directory entry has been retrieved, the password can be verified, and the group query can be constructed from it:

Let us assume we have gotten the entry for user jane:

# jane, People, corp.com
dn: cn=jane,ou=People,dc=corp,dc=com
objectClass: person
objectClass: inetOrgPerson
sn: doe
cn: jane

then the password verification can be simulated by

ldapsearch -H ldap://ldap-server:636/ \ # host
  -b cn=jane,ou=People,dc=corp,dc=com \ # always the entry's DN
  -w janespassword                      # as provided via sign in from

where any non-failure result (such as 32 No such object) would indicate valid credentials.

Finally, the group search query for that user entry looks like

ldapsearch -H ldap://ldapserver:636/ \        # host
  -D cn=service_account,dc=corp,dc=com \      # bind_dn
  -w admin \                                  # bind_password
  -b ou=Groups,dc=corp,dc=com \               # base_group_search_dn
  -s sub \
  '(member=cn=jane,ou=People,dc=corp,dc=com)' # (filter_groups_by_user_attr=[that attr of user entry])

With an additional group_query_filter, the final filter is

  '(&(objectClass=group)(member=cn=jane,ou=People,dc=corp,dc=com))' # (&group_query_filter(filter_groups_by_user_attr=[...])

Note: if the user entry contains more than one filter_groups_by_user_attr attribute, multiple queries will be executed, and their results combined.

Other Common Issues

If a user, following a sign in through LDAP or SAML, sees a

502 Bad Gateway

error page, the group information collected for the user exceeds some internal limits.

This can have two causes: the user having too many groups, or referencing LDAP groups by distinguished names (DN). The latter can cause little information (e.g. the group name “admins”) to grow out of proportion (e.g. “cn=admins,ou=DeptA,ou=CityB,ou=StateWA,dc=subcorp,dc=corp,dc=com”). This can be mitigated by changing the group_display_name_attr from DN to cn (common name). Note that for authorization purposes, that is also advisable. LDAP-provided groups are referenced in policies using team:ldap:<group-name>. Thus team:ldap:admins is handier than team:ldap:cn=admins,ou=DeptA,ou=CityB,ou=StateWA,dc=subcorp,dc=corp,dc=com.

The other cause, having too many groups for a user, can be addressed by using the group_query_filter to restrict the group results (for all users). Anything expressible in an LDAP search query and supported by the LDAP service can be configured there. For example, given a flat list of groups in a directory service like

cn=group1,ou=Groups,dc=corp,dc=com
cn=group2,ou=Groups,dc=corp,dc=com
cn=group3,ou=Groups,dc=corp,dc=com
cn=group4,ou=Groups,dc=corp,dc=com
cn=group5,ou=Groups,dc=corp,dc=com

a group_query_filter of (|(cn=group1)(cn=group2)) would restrict the group search results to either one of those groups. Note that this has no implications on which users get authenticated; it only affects the groups recognized by Chef Automate. For example, given users Jane and Jack, where Jane is a member of group1 and group3, and Jack of group3 and group4: Jane’s groups would resolve to group1 only, and Jack would have no groups – but still be able to access Chef Automate. In a similar manner, selected groups could be excluded from the results explicitly, by using a filter like (!cn=group2)

Given a more structured directory service layout, including multiple trees of groups, further options become possible: Assuming the layout is like

cn=group1,ou=AGroups,dc=corp,dc=com
cn=group2,ou=AGroups,dc=corp,dc=com
cn=group3,ou=BGroups,dc=corp,dc=com
cn=group4,ou=BGroups,dc=corp,dc=com
cn=group5,ou=CGroups,dc=corp,dc=com

you can use your directory server’s query capabilities to restrict the results to a subtree. The concrete details depend on the product in use; for example in servers supporting extensible match, all group entries below AGroups and BGroups could be retrieved using a group_query_filter of (|(ou:dn:=AGroups)(ou:dn:=BGroups)).

See LDAP Wiki Extensible Match Search Filter for details.

LDAP

Authentication via Existing Identity Management Systems

Supported Identity Management Systems

Overview

Microsoft Active Directory

Changing Chef Automate Configuration

Minimal MSAD Configuration

Minimal MSAD config.toml

Full MSAD Configuration

Example Full MSAD config.toml

Extended LDAP Settings

Example Extended LDAP config.toml

Sign In with LDAP

Authorization with LDAP

Connect

Bind

User Search

Filtering Which Users Can Sign In

Sign In Bind

Group Search

Configuration Overview

Example Configs

Troubleshooting

Troubleshoot your Connection

Troubleshoot Bind

Troubleshoot User Search

Troubleshoot Sign In Bind

Troubleshoot Group Search

ldapsearch Example Queries

Other Common Issues

Chef Product

Search Results

`ldapsearch` Example Queries